Global| Collection | Member Centre | Free information | RSS

     Plastic machinery equipment


film blowing machinery

plastic dryer

Compression molding machine

Central feeding system

Forming Machine


Weigh Scale Blender

volumetric doser

powder suction machine

Heat sealing machine

automatic feeding


Dehumidifying dryer

auto loader

centralized conveying system

Pneumatic conveyor

Intelligent manipulator

Welcome to join Honeycomb Dehumidifier!Important tips 1, the information of this site is for reference only, actual please field assessment!Two, severely crack down on network fraud! If shippment is needed, please visit the spot personally to avoid being deceived.
Your current location:Plastic-machinery-equipment>>drying system
  Honeycomb Dehumidifier Details description
product name:Honeycomb Dehumidifier
release time:2020-05-16 10:32:23
Price:¥USD 2640
simple description:Working with hopper dryer,the denumidifier is used to dehumidify engineering piastics which contain moisture,such as PA,PC,PET,etc.
weight :145.00
unit weight:KG
characteristic:For Plastic Material Drying
patent:Intelligent Drying System Control Software
Producing country:CHINA
Product alias:Honeycomb Rotor Dehumidifier
  Honeycomb Dehumidifier Product introduction

Honeycomb Dehumidifier parameter

Model HF-80
Drying Air Volume (m^3/hr) 80
Drying Blower Power (KW) 0.75
Regeration Blower(KW) 0.2
Regeration Heater(KW) 3.8
Cooling Nozzle(lnch) 3/4"
Out/in Air Pipe Dia. (Inch) 2
Dimensions (LxWxH) CM 82×55×128
Net Weight (KG) 145

Note: We reserve the right to change spencifications without prior notice.
Honeycomb Rotor Dehumidifier

Honeycomb Dehumidifier Equipment principle

The core component of the honeycomb dehumidifier is a honeycomb rotor that rotates slowly. The partitions on both sides of the rotor made of highly sealed silicone rubber divide the entire surface into three sectors: the dehumidifying area, regeneration area and cooling area.
When the humid air enters the dehumidifying area of the rotor, the water vapor of the humid air is absorbed by the active silica gel of the rotor and enters the regeneration area, and then the dehumidified dry air is blowed to hopper dryer by blower. 
There is plastic material with strong hygroscopicity inside the hopper. The dehumidified dry air absorbs the internal moisture of the plastic material. As the absorbed water increases, the rotor restores its ability to absorb moisture to complete the regeneration process.
Under the action of the drying blower, the dehumidified air is sent to the dehumidifier, and the dehumidification sector gradually becomes more saturated. Under the drive of the speed control motor, it slowly turns into the slow cooling zone, and the high temperature blown in reverse through the regeneration zone After the air adsorbs the moisture absorbed in the rotor, it enters the dehumidification area for dehumidification. The above-mentioned dehumidification and regeneration processes happen at the same time, the air is continuously dried, and the rotor is continuously regenerated, and the cycle is repeated, thus ensuring the continued stability of the dehumidifier.
Honeycomb Rotor Dehumidifier

Honeycomb Dehumidifier application

Honeycomb dehumidifiers are mainly used to dry hygroscopic engineering plastics such as PET, PC, PLA, PA, TPU, TPE, HDPE, etc.
Honeycomb Rotor Dehumidifier

Honeycomb Dehumidifier Precautions

1,The dehumidifier should be cleaned frequently and kept clean. 
2, When cleaning the machine, wipe gently with a damp cloth; avoid direct water splashing to avoid damage to electrical insulation. 
3, If there are stickies on the surface of the machine, which can be washed with soapy water. 
4, Avoid spraying with gasoline, petroleum spirit, solvents or spray insecticides to avoid peeling paint or discoloration. 
5, Do not use thin rods or wires to dig inside the machine to avoid malfunction or danger. 
6, Unplug the power cord to maintain the life of the machine when there is a power outage. 
7, Put the machine stand up, not tilted or laid down, to avoid machine malfunction or abnormal noise.
Product alias:
Honeycomb Rotor Dehumidifier
Technology (patented product)
Industry News
related question
application solution
Post a comment In totalComments
username: password:
Captcha: Anonymous
Product video recommendation
Product name:Honeycomb Dehumidifier
Enterprise:Dongguan mechanical equipment Co., Ltd
Region:Dong guan
Telephone:+86 13669807274
Honeycomb Dehumidifier recommend
Central feeding system
Honeycomb Dehumidifier technology
Honeycomb Dehumidifier Accessories
Honeycomb Dehumidifier
Honeycomb Dehumidifier application
Honeycomb Dehumidifier
Honeycomb Dehumidifier principle
Honeycomb Dehumidifier Program