simple description:The dehumidifying dryer combine a dehumidifying and drying system in a single unit.They have many applications in processing plastic materials such as PA,PC,PBT ,PET,etc.
weight :600.00
unit weight:KG
characteristic:For Plastic Material Drying
patent:Intelligent Drying System Control Software
manufacturer:HENGJU
Producing country:CHINA
Product alias:3-in-1 machine
3 in 1 Dehumidifying Dryer Product introduction
3 in 1 Dehumidifying Dryer parameter
Dehumidifying dryer
Model
HCF-400400
Dryer Hopper
Capacity (KG)
400
Heat Protection Material
Fiberglass+Staninless Steel
Dry-Air Dew point
-35℃ to -45℃
Temperature (℃)
80-180
Air Flow (m^3/h)
400
Blower Power (KW)
5.5
Regeneration Blower (KW)
0.75
Drying Heater (KW)
20
Regeneration Heater (KW)
7.2
Pipe Sizes
Drying (mn)
76
Cooling (lnch)
3/4"
Regeneration (mn)
51
Conveying Blower (KW)
2
Conveying Distance (m)
Stage 1
6-10
Stage 2
6-10
Hose Size (Inch)
1.5
Sensor Hopper Capacity (L)
7.5
Vacuum Hopper Capacity (L)
7.5
Dimension LxWxH (cm)
150×130×280
Approx.Net Weight (KG)
600
Remark: Compressed air Pressure must more than 0.4MPa,air flow more than 15L/H; We reserve the right to change spencifications without prior notice.
Dehumidifying dryer,3-in-1 machine
3 in 1 Dehumidifying Dryer Equipment principle
Dehumidifying dryer
3-in-1 machine
3 in 1 Dehumidifying Dryer application
Dehumidifying dryer3-in-1 machine is mainly used for engineering plastics with strong hygroscopicity such as PA, PC, PBT, PET, ABS, etc. for efficient dehumidification dryer operation, and is connected with hot air hopper dryer.
3-in-1 machine
3 in 1 Dehumidifying Dryer Precautions
Dehumidifying dryer 1, please carry out electrical construction in accordance with the "Electrical Equipment Standards", "Inner Line Regulations" and this operating manual. 2, please do not use the power supply other than that specified. 3, please complete the specified grounding project. (Yellow power cord) 4, please do not damage the wire, do not put pressure on the wire, do not place heavy objects on the wire, and do not pinch the wire. May cause electric shock. 5, wiring and inspection work should be performed by professional technicians. 6, when you need to disassemble the machine for inspection and cleaning, please cut off the power supply and compressed air source first. Product alias: