Dehumidification dryer

Contained all functions of single-hopper dryer

Suction Box with Line clean valve, to prevent material left inside pipes.

Support Dew point moniter display.

At least 6 years' service life for the desiccant wheel, it can be cleaned as soon as dyring efficiency.

Dew Point upt to -40 to -50℃， Lower dew point available with enhanced configuration.

LCD Display, language selection.

Good for drying PET, PC, PLA, PA, TPU, TPE, HDPE, etc.

Dehumidifying drying system for drying PC, PET, PE

Low dew point for better drying performance, and the mixer inside the hopper can prevent material from getting clump during drying.

The HCF dehumidifying dryer use honeycomb dehumidifiers with an eye-catching semi-integral appearance.

SDL series “Standard” Drying loaders integrate plastic drying and loading into one unit.

The maximum drying temperature can reach 160℃ and it also can choose the optional double-layer insulation model to obtain uniform hopper temperature with less heat losses

The SEHD energy-efficient hopper dryer can be used for drying most non-hygroscopic materials, such as PS, PP, ABS, etc.

Good for drying PET, PC, PLA, HDPE, TPE, TPU, etc. Capacity ranges from 6kg to 3000kg.

Insulated hopper dryers are very good for drying PET, PC, PLA, HDPE, TPE, TPU, etc. Capacity ranges from 6kg to 3000kg.

Desiccant dryer are good for drying PET, PC, PLA, HDPE, TPE, TPU, etc. Capacity ranges from 6kg to 3000kg.

Plastic insulated hopper dryers are widely used in drying some hygroscopic plastic materials like PET, PC, PLA, PA, PA66, TPU, TPE, HDPE, etc.